diff --git a/seqs/raspberry.sh b/seqs/raspberry.sh
index 735c734..6fe71fc 100755
--- a/seqs/raspberry.sh
+++ b/seqs/raspberry.sh
@@ -45,7 +45,9 @@ downDir="/tmp"
 downLoc="${downDir}/raspbian_$downDay.zip"
 
 step_2_info() { echo -n "Write raspbian image to SD card "
-  if [ ! -z $2 ] ; then echo "$2"; else echo "[SD CARD DEVICE]"; fi }
+  if [ -z $2 ] ; then echo "[SD CARD DEVICE]"; else echo "$2"; fi 
+  echoinfo "This operation will delete all data previously on the SD card!"
+}
 step_2_alias() { ALIAS="writesd"; }
 step_2() {
   if [ "$downImgName" == "" ] ; then
@@ -56,48 +58,83 @@ step_2() {
     echoerr " [E] No raspian image found"
     return 1
   fi
-  if [ ! -z $2 ] && [ "$2" != "" ] && [ -b "$2" ] ; then
-    SDDEV="$2"
-  fi
 
-  read_sd_dev
-  # check if device is a block special file
+  read_sd_dev "$2"
+  # check if device was confirmed
   if [ $? -ne 0 ] ; then
     echoerr " [E] SD card device not found"
     return 1
   fi
-  exe dd bs=4M if="$downImgName" of="$sdDev" conv=fsync
+
+  # write image
+  exe dd bs=4M if="$downImgName" of="$SDDEV" conv=fsync
+  endReturn -o "$?" "Writing image to $SDDEV failed"
   exe sync
-  #x TODO ? automatic remount
+
+  # SD partitions will have new informations now
+  # Leave SD card device intact for next step
+  SDBOOT=""
+  SDROOT=""
+
+  # TODO ? automatic remount
   echoerr " [W] Please remove SD now and plug it back in."
   exe read -p "     Press enter to contiue."
 }
 
-step_3_info() { echo "TODO Prepare SD for first run"; }
+step_3_info() { echo "TODO Prepare SD for first run [SD CARD DEVICE]"; }
 step_3() {
-  #TODO
   echoerr " [E] Not ready yet...TODO"
-  return 1
-  read_sd_dev
+  #return 1
+
+  if [ -z $2 ] && [ ! -z $SDDEV ] ; then
+    if [ $QUIET -ne 0 ] ; then
+      answer="n"
+    else
+      exe read -p "Is $SDDEV still the SD card (y/[n])? " answer
+    fi
+
+    case $answer in
+      [yY])
+        # Nothing todo
+        ;;
+      *)
+        SDDEV=""
+        ;;
+    esac
+    fi
+
+    read_sd_dev "$2"
+    if [ $? -ne 0 ] ; then
+      echoerr " [E] SD card device not found"
+      return 1
+    fi
+
+    if [ ! -w "$SDBOOT" ] ; then
+      echoerr " [E] SD card boot partion not writeable"
+      return 1
+    fi
+
   # enable systemd ssh service
   exe touch "$SDBOOT"/ssh
 
-  # save SD boot and run settings for emergency start from SD
+  # save SD boot settings for easy emergency start from SD
   cp -ar "$SDBOOT"/cmdline.txt "$SDBOOT"/cmdline.txt.sd
   cp -ar "$SDROOT"/etc/fstab "$SDROOT"/etc/fstab.sd
 }
 
-step_4_info() { echo "TODO Prepare SD for HD boot"; }
+step_4_info() { echo "TODO Prepare SD for HD boot [SD CARD DEVICE] [HD DEVICE]"; }
 step_4_alias() { ALIAS="hdboot"; }
 step_4() {
   #TODO
   echoerr " [E] Not ready yet...TODO"
-  return 1
-  read_sd_dev
+  #return 1
+  read_sd_dev "$2"
+  echo $?
   echo "$SDBOOT"
   echo "$SDROOT"
   echo "$SDROOTPUUID"
-  read_hd_dev
+  read_hd_dev "$3"
+  echo $?
   echo "$HDROOT"
   echo "$HDROOTPUUID"
   ## ? modify PARTUUID of sdBoot/cmdline.txt
@@ -167,23 +204,28 @@ ledOffCmd="sudo sh -c 'echo 0 > ${ledPowerBright}'"
 
 
 read_sd_dev() {
-  local devsd=""
-  if [ -z $SDDEV ] && [ ! -b "$SDDEV" ] ; then
-    if [ -z $2 ]; then
-      echo " [I] Available devices:"
-      echo
-      exe lsblk -p
-      echo
-      exe read -p "Provide SD card device (e.g. /dev/sdb): " devsd
-    else
-      devsd="$2"
-    fi
-    if [ -b "$devsd" ] ; then
-      SDDEV=$devsd
-    else
-      return 1
-    fi
-  fi 
+  if [ ! -z "$1" ] ; then
+    SDBOOT=
+    SDROOT=
+    SDROOTPUUID=
+    SDDEV="$1"
+  elif [ -z $SDDEV ] || [ ! -b "$SDDEV" ] ; then
+    SDDEV=
+    SDBOOT=
+    SDROOT=
+    SDROOTPUUID=
+    echo " [I] Available devices:"
+    echo
+    exe lsblk -p
+    echo
+    exe read -p "Provide SD card device (e.g. /dev/sdb): " SDDEV
+  fi
+
+  if [ ! -b "$SDDEV" ] ; then
+    SDDEV=
+    return 1
+  fi
+
   if [ -z $SDBOOT ] ; then
     SDBOOT=$(findmnt -no TARGET "${SDDEV}p1")
   fi
@@ -196,23 +238,25 @@ read_sd_dev() {
 }
 
 read_hd_dev() {
-  local devhd=""
-  if [ -z $HDDEV ] && [ ! -b "$HDDEV" ] ; then
-    if [ -z $2 ]; then
-      echo " [I] Available devices:"
-      echo
-      exe lsblk -p
-      echo
-      exe read -p "Provide HD device (e.g. /dev/sdf): " devhd
-    else
-      devhd="$2"
-    fi
-    if [ -b "$devhd" ] ; then
-      HDDEV=$devhd
-    else
-      return 1
-    fi
-  fi 
+  if [ ! -z "$1" ] ; then
+    HDROOT=
+    HDROOTPUUID=
+    HDDEV="$1"
+  elif [ -z $HDDEV ] || [ ! -b "$HDDEV" ] ; then
+    HDROOT=
+    HDROOTPUUID=
+    echo " [I] Available devices:"
+    echo
+    exe lsblk -p
+    echo
+    exe read -p "Provide HD device (e.g. /dev/sdf): " HDDEV
+  fi
+
+  if [ ! -b "$HDDEV" ] ; then
+    HDDEV=
+    return 1
+  fi
+
   if [ -z $HDROOT ] ; then
     HDROOT=$(findmnt -no TARGET "${HDDEV}1")
   fi